A Micro-Inverter Power Station está disponível como unidade autônoma ou como plataforma de energia expansível. Como o lado de CA é construído a partir de micro-inversores redundantes conectados em série, o sistema escala de uma única unidade portátil até configurações bifásicas e trifásicas.
| Parâmetro | Especificação |
|---|---|
| Tipo de produto | Estação de energia portátil (série Micro-Inverter) |
| Tecnologia | Micro-inversores conectados em série com a tensão de CA de baixa tensão |
| Topologia do sistema | Célula integrada All-In-One, PCS, BMS e EMS |
| Thermal Design | No heatsink, no fan design |
| Capacidade de saída máxima | 500% de saída de pico (motor e ferramenta de partida de alta corrente de entrada) |
| Eficiência de Conversão | Até 99% |
| Nível de ruído | 10 dB(A) ultra-silent |
| Proteção de Ingress | IP65 impermeável |
| Casing | Resistente a colisões |
| Peso | 20 kg leve |
| Vida de serviço | Longa duração |
| Power Expansion | Fácil de expandir para sistemas de fase dividida e trifásicos |
| Monitoramento | Monitoramento IoT e posicionamento GPS |
| Cell Management | Controlo preditivo e balanceamento activo |
| Rated Output Power | – |
| Capacidade da bateria | – |
| AC Output Voltage & Frequency | – |
| Charging Input | – |
Note: The table lists the core platform specifications of the Micro-Inverter Portable Power Station. Electrical ratings (rated output power, battery capacity, AC output voltage/frequency and charging input) are configured per project and quoted on request. As an OEM/ODM energy storage manufacturer, UFOPOWER can tailor output power, capacity, port layout, AC expansion (split-phase / 3-phase) and enclosure branding to your specification.
The 500% peak output capability is designed for the real starting loads of professional power tools. The following examples show the type of work the platform is engineered to support:
| Power Tool | Rated Power | Typical Work Per Charge |
|---|---|---|
| Cut-Off Saw | 2,700 W | 38 cuts on cast iron pipe 110 mm |
| Arc Welding Machine | – | Up to 89 electrodes 2.5 mm |
| High Pressure Washer | 3,000 W | ~60 m² cleaned area |
| Jackhammer | 2,200 W | ~7.5 t of concrete slabs demolished, 150 mm |
| Diamond Core Drill | 3,300 W | ~32 holes in concrete, 150 mm core bit, 150 mm deep |
| Magnet Base Drill | 1,400 W | ~223 holes in stainless steel, 35 mm bit, 10 mm |
| Concrete Mixer | 600 W | ~11.5 t of concrete, 180 l barrel |
| Circular Saw | 3,000 W | ~4,100 cuts, 50 × 100 mm lumber |
Note: Tool results are engineering reference data for the platform under standard test conditions; actual runtime varies with tool type, load profile and battery configuration.
Instead of a single bulky inverter, the platform uses micro-inverters connected in series on the AC low-voltage side. This architecture starts high-inrush tools that ordinary battery stations cannot, while keeping conversion losses extremely low.
500% peak output – absorbs the inrush current of motors, compressors and welders without tripping or stalling
Up to 99% conversion efficiency – more of the stored energy reaches the tool, extending usable runtime
Redundant AC-side series design – micro-inverters are connected in a redundant series, improving fault tolerance and reliability
No heatsink, no fan design – a compact, sealed power stage with no moving parts to wear out or clog
Scales to split-phase and 3-phase – expand from a single portable unit to higher-power multi-phase systems
Proprietary DirectSine® and DirectVolt® power conversion technologies – digital control at the core of the micro-inverter chain
Fuel generators are loud, heavy, fume-emitting and need constant maintenance. This portable power station removes every one of those problems, which makes it suitable for indoor, night-time and clean-environment work where generators are simply not allowed.
10 dB(A) ultra-silent – virtually inaudible operation for film sets, live streaming, hospitals and residential areas
IP65 impermeável – sealed against rain, dust and hose spray for outdoor and jobsite use
20 kg leve – carryable by one person, with no fuel cans, no lifting equipment
Collision-resistant casing – built to survive transport and rough site handling, with long service life
Zero emissions and no fuel – no exhaust fumes, no CO risk indoors, no fuel storage or transport restrictions
No engine maintenance – no oil changes, spark plugs, filters or carburetor servicing
Behind the sealed enclosure is a deeply integrated electronics platform: cells, PCS, BMS and EMS are merged into one system managed by digital control at cell level. This delivers superior safety, longer life and intelligent operation.
All-in-one Cell + PCS + BMS + EMS – deep integration reduces wiring, size and points of failure
Cell-level power conversion and digital control – precise management of every cell for balanced, stable output
Controlo preditivo e balanceamento activo – anticipates load and imbalance, actively equalizing cells to extend lifetime
Super safety and extreme durability – robust protection strategy with a long-service-life design
Monitoramento IoT e posicionamento GPS – remote status tracking, fleet visibility and location awareness
Custom OEM/ODM from the UFOPOWER factory – output power, capacity, AC voltage/frequency and phase configuration tailored to your project
aplicativo WhatsApp
EN
AR
DE
ES
FR
JP
KO
PT
RU
Página inicial > 
